Connecting a different load to the Wireless Power Kit

martes, 28 de marzo de 2017 0 Comentarios, Dejar un Comentario
Connecting another load to the Wireless Power Kit its pretty straight forward, as simple as to solder two cables. In this case I tried another LED module, but this with higher power specifications.

 In order to connect this load first of all we need to find the following pads labeled VOUT and GND, this pads and pins are capable of provide 10v @1A - in other words 10W output power.

Connecting another load

This way we have the specified power output described above, now lets mesure the Voltage and Current:

Voltage reading of 10.02 volts of 10 volts specified. 

Current capabilities of 1.1 Amps (10W)

So this kit by it self its capable of recharging a two cell battery without a problem and very fast also.
We could charge a two cell battery of 1000mAh rated 1C for charge within just 1 hour, that sounds good enough for our application.

Now that we now the power output capabilities we can select our battery and battery charger for our Feeding Baby Bottle Warmer. In the next post i will show what I will use as a heater element that will be in charge of getting the baby bottle at the right temperature.

If you have any comment or questions please leave them in the comment section below.


jueves, 23 de marzo de 2017 0 Comentarios, Dejar un Comentario

Wurth Electronics & ROHM's Wireless Power Kit 

Lets begin describing what is in this kit and what is it for, this kit is a practical to begin and to understand how Wireless Power works, this kit contains:

- Wireless Power Transmitter
- Wireless Power Receiver
- LED Load Module
- Power adapter

So this is the Transmitter:


This is the receiver with the LED load module attached:


With this two modules we can already do wireless power of 15W and connected to any device that accepts a voltage around 10 volts connected to the receiver module. Lets see them in action!



It really looks pretty amazing don't you think!?

Next week i will post how to connect another load to this KIT in a fast and a simple way before we get to start the design accordingly with our needs.

For more detail information on how this kit works I leave you the following links below:

Off the clock design challenge project introduction.

jueves, 16 de marzo de 2017 2 Comentarios, Dejar un Comentario

A week ago I received an email of Wurth Electronics telling me that i was selected to participate in the OFF THE CLOCK DESIGN CHALLENGE, this challenge consist in creating a product using their Wireless Charging KIT, this challenge will be 12 weeks challenge in which I will be posting all my decisions and updates of my project, to read more about this challenge click here.

What is my project for OCDC (Off the clock design challenge)?
- It's a Portable Baby Bottle Warmer (PBBW)

What does a PBBW is used for? why a PBBW? Let me explain the idea of this project.

A lot of parents are in constant movement, at work, to meetings, etc. Today there is not much time to simple things like to warm up the baby feeding bottle, that kind of task will just take a few minutes, but do we really always have that time? or are we always in the right place at the right moment to accomplish that kind of task, the answer, no, not always. This is why I would like to start this project using the Wurth's coils to do a wireless charging of this device to make more easy the way we warm up a baby feeding bottle.


(Wuth's coil image)

This PBBW will be able to warm up a standard size of baby feeding bottle anywhere and a fast charge of the battery with out connecting cables to it. It will have light notifications to inform us the temperature TARGET, STATE and READY notifications, i will use the Wurth's RGB LEDs to give this kind notifications, and also to make the interaction with the users more natural and self explained.


(Wuth's RGB LEDs image)

This how I imagine the PBBW will look like:


(PBBW reference image)

Now, some specifications:

  1.  3 times baby feeding bottle warm-up cycles or more.
  2.  Rechargeable wireless battery.
  3.  Target temperature set by user from 26 to 36 ºC.
  4.  Full color light notifications.
  5.  Portable size, Standard baby feeding bottle size. 


That is all for today, don't forget to leave your comments in the section below. :P